Men's Fjord 1.1
Premium Sleeveless - Performance Beyond Expectation
The Fjord 1.1 has all the benefits of our Fjord 1.0, sans sleeves. For slightly warmer water temperatures (down to 16° C / 61° F) and for those who simply like to swim sleeveless. The same incredible buoyancy and speed that deboer delivers time and again.
- Super light 44Cell HBF-Limestone WhaleSkin™ neoprene for better buoyancy and rotation stability
- 5mm 48Cell AirFloat™ Stability Panels
- C8 coated, Hydrophobic Super-Stretch comfort lining feels great
- GlideSkin™ Surface coating lowers water friction
- 3mm AquaGrip™ panels
- YKK Stainless Steel bottom-up runner zipper
- DolphinSkin neck closure for a leak-free swim
- Anatomically correct fit ensures peak performance without restrictions
- Rear zip entry for fast and easy entry and exit
- Hand glued with double blind stitched seams
- Made for Cool Temperatures: down to 16° C / 61° F
- Approved for use by Ironman, ITU, and ETU when wetsuits are permitted.
WhaleSkin™ - HBF Limestone Rib Neoprene
Limestone neoprene has a high micro-cell structure. These are independent closed cells (like bubbles) within the neoprene that are packed together at extremely high density. Limestone neoprene has a 94% cell penetration - over 30% more than oil-based neoprene leading to greater impermeability, lightness, warmth, durability and stretch with memory allowing more freedom of movement. Our WhaleSkin rib neoprene increases the surface by 18.3%, which in turn increases buoyancy and ultimately increases your speed. In addition, it’s more environmentally friendly.
Incredibly flexible and highly durable. Our patented ultra-thin unique polymer (0.3) is fingernail tear proof. It has advanced shape memory, 4-way super stretch, and is lined with an ultra-flexible insulating lining also with 4-way stretch.
Warmer than our other materials yet is still incredibly flexible and highly durable. Our exclusive polymer is fingernail tear proof. It has advanced shape memory, 4-way super stretch, and is lined with an ultra-flexible insulating lining also with 4-way stretch.
Made from our HBF-Limestone neoprene (Highly Buoyant, Flexible, and lightweight 48 cell neoprene). We conducted studies to understand how adding buoyancy can affect swim position. Based on these studies, we positioned the panels to create maximum stability, minimize rotation and ensure better balance.
Our unique glide layer coating technology provides exceptionally low water friction and increases hydrodynamics. In addition, it reduces resistance when changing out of your wetsuit, thus, helping to save precious time during your race transition. This coating aids in the reduction of fingernail tears.
C8 Hydrophobic Lining
C8 is a water-repellent coating that prevents water absorption and aids in the increase of buoyancy; plus it feels great. Our C8 water-repellent coating is super soft on your skin and allows for just enough water to warm up your body while preserving the buoyancy.
The perfectly measured, positioned, finely tuned and extensively tested grooves reduce turbulence and increase the surface area in contact with the water, increasing the efficiency of each stroke and kick and aiding in forward propulsion.
Developed by deboer for exclusive use with our wetsuits. DolphinSkin ensures a soft, leak-free neck. Especially useful for those who are training with longer open water swims.
We only use YKK stainless steel zippers which close from bottom to top. This makes opening the wetsuit and getting out much easier and therefore, faster in transition.
More information one how to properly secure the DolphinSkin neck closure can be viewed here.
Care should be taken when donning the wetsuit to avoid damaging the neoprene skin with fingernails. Always use the pads of your fingers to put on a suit. Do not pinch small folds and pull, make sure to grab large folds of the suit when pulling. Small cuts or tears can be repaired with wetsuit glue.
The exterior surface of your wetsuit is manufactured with a hydrophobic outer skin designed to reduce surface friction (drag.) It is designed to withstand the normal wear and tear during a normal swim session. Care should be taken to avoid contact with sharp rocks or any other sharp objects. Small cuts or tears do not affect wetsuit performance.
Fully unzip the wetsuit before removing one section at a time. Avoid contact with sharp fingernails. Salt and chlorine water can damage the neoprene drying it out and affecting its flexibility. To ensure continued flexibility it is important to soak your wetsuit in lukewarm, fresh water for at least 5 minutes after each use, then thoroughly rinse it with fresh water. To dry, place the wetsuit inside out on a wide hanger in a ventilated place, away from direct sunlight. Maintenance is important, therefore it is recommended to wash your wetsuits with a specialized antibacterial soap every few sessions.
Wetsuit material can develop permanent creases if left folded for an extended period of time. Therefore it is best to store your wetsuit laying flat. Alternatively, hang it on a specially designed wetsuit hanger, thick coat hanger, or as wide and thick a hanger as you can find. Consider the weight of a wet or damp wetsuit and avoid deformation around the shoulders. Some like to roll their wetsuits, but do not fold it under any circumstances.
Zippers are designed to be pulled open and closed in a straight line. Avoid pulling at excessive angles. Ask for assistance to zip and unzip as needed.
Chemicals & Solvent
Avoid contact with oil, gasoline, aerosols or any solvents as they degrade rubber and plastic materials. Do not use any type of alcohol, or lubricant.
Free Shipping Worldwide on all orders above $100 USD.
We offer free standard shipping of all orders worldwide above $100 USD. Price includes all taxes and duties.
For all other purchases, shipment rates are calculated at Checkout.
Can I return my product?
Yes. If you are not 100% satisfied with any deboer product it can be returned within 14 days of delivery provided it is in new condition. For wetsuits new condition means with the tags attached.
Can I return or exchange a clearance product
As of October 24, 2022, clearance products are only eligible for size exchanges, not returns. The customer is responsible for paying the return shipping fees for items that are being exchanged for a different size.
Prior to sending your product back to deboer please email us at firstname.lastname@example.org. Returns can be sent to:
deboer wetsuits - Sport Import Europe b.v.
Re: Your name and order number
Einsteinstraat 16 B
3316 GG Dordrecht
How do I submit a warranty claim?
All deboer products are guaranteed against manufacturer defects of material and craftsmanship for 1-year from the date of purchase. In the event you need to submit a warranty claim you can email us at email@example.com. In your email please include:
- Description of the problem
- Photo of the problem
- Your order number or proof of purchase
Our Warehouses and Couriers
We have warehouses in the USA and the The Netherlands. From our US warehouse we ship via FedEx, UPS, or USPS. From our Netherlands warehouse ship via FedEx, Post NL and DPD.